|
Special Offers »
Cyrus Bargains »
Cyrus 8XP d QX Amplifier Repro |
| Cyrus 8XP d QX Amplifier Repro |
|
|
 |
Cyrus 8XP d QX Amplifier Repro
The Cyrus 8XP d QX Amplifier is currently the highest performance integrated amplifier within the Cyrus range. The features are the same as that of the 8XP d, but it also features the high performance QX DAC card.
The Cyrus 8XP d QX Amplifier is a high performance DAC module of very advanced specification. In keeping with the Cyrus tradition of low-obsolescence and upgradeability the module builds on the considerable strengths of the Cyrus 8 XP d.
The QX module in the Cyrus 8XP d QX Amplifier features quartz reference anti jitter circuits to re align the edges of the digital signals coupled with up-sampling to 192kHz. This eliminates timing errors which manifest themselves as unwanted signals in the output.
A 24Bit integrated filter DAC in the Cyrus 8XP d QX Amplifier delivers state of the art technical performance in noise, distortion and linearity. This exceptional low level response allows small signals to be conveyed more faithfully.
An analogue filter inside of the Cyrus 8XP d QX Amplifier is a low noise 4 pole design, giving flat response across the audio band, with rapid attenuation of the high frequency digital images.
Specially chosen components and the widespread use of SMD devices minimises path lengths and component lead-out wires. This together with extensive power supply decoupling and star earthing enables the Cyrus 8XP d QX Amplifier to perform with complete freedom from noise and instability, resulting in outstanding low-level resolution and clarity.
Cyrus 8XP d QX Amplifier Repro Specification:
-
Line inputs - 6 analogue
-
8 XPd QX - Digital inputs - 2 electrical SPDIF + 2 optical SPDIF + 1 USB Computer slave input
-
Outputs
-
Zone 2 or tape
-
Bi-wire Loudspeakers
-
Preamp-out x 2
-
Headphone
-
Internal power Supplies -
-
1 x 350 VA Toroidal transformer with 5 regulated rails, plus separate toroidal transformer for control systems
-
Continuous Power - 115 W/CH (into 4 Ohms) 70 W/CH (into 8 Ohms)
-
Burst Power - 320 W (IHF, one channel driven into 1 Ohm)
-
Distortion - 0.002%, 1kHz (into 8 Ohms) 0.005%, 1kHz (into 4 Ohms)
-
Frequency Response - -3 dB, 0.1Hz and 100kHz
-
Damping Factor (1kHz) - 150
-
Input sensitivity (70W) - Line: 237mV
-
Input impedance - 40kOhm (RCA).
-
Output voltage - 237mV (Tape out), 480mV (Pre out)
-
S/N Ratio - 105dBA (ref. 40W)
-
Channel Balance - ±0.2dB (0dB to -63dB)
-
Volume control accuracy - ±0.1dB (0dB to -63dB)
-
Dimensions (H x W x D) -73 x 215 x 360 (mm)
-
Weight - 5.9 kg
-
Finish - Brushed Black
|
|
|
|
| People who bought this were also interested in the following |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.JPG)
.JPG)
.JPG)
