Roksan Kandy K2 Amplifier and CD Player Package
Roksan Kandy K2 Amplifier is designed and refined to what would be expected of amplifiers classified as hi-end and costing twice its price. The new Roksan Kandy K2 Amplifier sounds far more accurate more delicate and even more powerful than its award winning predecessor the Kandy L.III. True dynamics and musical capabilities of the Roksan Kandy K2 Amplifier enhance the enjoyment and provide insight to all types of music. The sound stage and musicians have the realistic ‘sound’ and ‘air’ about them that is achieved by the highest class amplifiers around. Thanks to its superior design and use of highest quality components, the Roksan Kandy K2 Amplifier sets a new standard for true hi-end entry level amplification.
The new Roksan Kandy K2 Amplifier benefits from totally revised amplifier internals. The mains transformer and amplifier’s 3 AC/DC circuitry are now separated and moved to two sides away from the pre and amplifier main circuits thus dramatically reducing noise interference. After rectification circuitry, the power supply layout, distribution and tracking to different sections of the amplifier have been optimised and internal wiring minimised to ensure all sections work at their best.
Roksan Kandy K2 CD Player is designed and refined to bring joy to even the most discerning listeners. It will compliment any hi-end amplifier with a performance expected only from true hi-end CD players. The new Roksan Kandy K2 CD Player sounds far more detailed, more delicate with even more vigour than its 5 star winning predecessor the Kandy L.III. Life like dynamics and musical capabilities of the Roksan Kandy K2 CD Player can now provide enjoyment and insight to all types of music. The sound stage and musicians have realistic ‘sound’ and ‘air’about them providing separation and timing between the musicians that is achieved by the highest class CD players around. Thanks to its superior design and use of highest quality components, the Roksan Kandy K2 CD Player sets a new standard for true hi-end entry level CD replay.
The new Roksan Kandy K2 CD Player benefits from totally revised internals. The DAC section is now moved closer to the control section with improved circuitry and clocking system. The CD drive and data acquisition is improved to ensure the music replay is absolutely first class. Optimised control and DAC circuitry combined with careful power supply and regulation ensures signal integrity with minimal noise interference. This combined with the new D/A converter dig deep into the lowest levels of detail that add to the overal musical experience.
Roksan Kandy K2 Amplifier and CD Player Package Specification:
-
Roksan Kandy K2 Amplifier
-
Inputs Line Level (x5), Moving Magnet (x1), Tape (x1), Bypass (x1)
-
Input Impedance 47 kΩ
-
Input Sensitivity (120W) Line 470mV
-
Outputs Speaker L & R (x1), Preamplifier (x1), Tape (x1), Headphone (x1)
-
Output Power >125 Watts, into 8Ω
-
both channels driven
-
>190 Watts, into 4Ω
-
both channels driven
-
Power Supply 500VA Ultra Low Noise Toroidal Transformer
-
4 Regulated Supply Rails
-
Damping Factor >110 (8Ω)
-
Frequency response (-3dB), <3Hz – >100kHz
-
Gain 37.3dB Overall (Pre & Power)
-
5.7dB Preamplifier
-
31.6dB Power Amplifier
-
Harmonic Distortion <0.005% 1kHz - 8Ω
-
Signal to Noise Ratio Line 100dBa (ref 470mV)
-
Power Source 100V – 120V 50Hz / 60Hz
-
220V – 240V 50Hz / 60Hz
-
Power Consumption Standby <25W, Full Power 2-CH 8Ω < 330 W, 4Ω <550W
-
Dimension 432 x 380 x 90 (W x D x H) mm
-
432 x 380 x 102 (including feet)
-
Weigth 14 Kg
-
Roksan Kandy K2 CD Player
-
Operating System CD digital audio system (CD, CD-R, CD-RW)
-
Frequency Response 20Hz – 20kHz ± 0.2dB
-
Harmonic Distortion < 0.002% @ 0dB, 1kHz
-
< 0.006% @ -30dB, 1kHz
-
< 0.002% @ 0dB, 20Hz
-
< 0.008% @ 0dB, 20kHz
-
Intermodulation Distortion < 0.001% @ 0dB
-
S/N Ratio (IHF-A Wtd.) 105 dB
-
Wow & Flutter Quartz precision
-
Channel Separation 110 dB @ 1kHz
-
100 dB @ 20kHz
-
Output Voltage 2.2Vrms
-
Digital Outputs 75 Ohm Coaxial, RCA
-
110 Ohm Balanced AES/EBU, XLR
-
Optical, Toslink
-
D/A Conversion PCM1798 Advance Segment, Audio-Stereo DAC
-
Resolution/Sampling 24 bits / 192 kHz
-
Oscillation 3rd Overtone Oscillation
-
Crystal Super precision, custom made
-
Jitter <150 psec
-
Idle Pattern <-112 dB
-
Stop band Rejection <-95 dB
-
Power Supply high performance low noise toroidal transformer
-
7 fully regulated power rails
-
Power Source 100V – 120V 50Hz / 60Hz
-
220V – 240V 50Hz / 60Hz
-
Power Consumption < 15 W
-
Dimension 432 x 380 x 90 (W x D x H) mm
-
432 x 380 x 102 (including feet)
-
Weight 9Kg
|
