back top

Click here to Navigate

Home > Brands > Chord Electronics > Chord Electronics CPA8000 Reference Pre Amplifier

Chord Electronics CPA8000 Reference Pre Amplifier

£27699.00
Availability In Stock





Chord Electronics CPA8000 Reference Pre Amplifier
http://www.fanthorpes.co.uk/images/www.fanthorpes.co.uk/
£27699.00 1In stock
Generous Trade in Available - CALL NOW: 01482 223 096

Chord Electronics CPA8000 Reference Pre Amplifier

The Chord Electronics CPA8000 Reference Pre Amplifier is available for demonstration in our Hull store by request.

The Chord Electronics CPA8000 Reference Pre Amplifier is the perfect partner for the Chord reference mono block amplifiers. Equipped with true dual mono contruction with seperate power supplies for each channel, and separate left and right frequency EQ adjust. The Chord Electronics CPA8000 Reference Pre Amplifier is a very impressive amplifier.


Part Exchange Available

To help reduce the cost of your new Chord Electronics CPA8000 Reference Pre Amplifier, Fanthorpes HiFi offer an excellent part exchange service. If you have HiFi that you want to us as part payment for the CChord Electronics CPA8000 Reference Pre Amplifier simply call us on 01482 223096 or email us at shop@fanthorpes.co.uk


Finance Available

Spread or defer payments of the Chord Electronics CPA8000 Reference Pre Amplifier over a year with Fanthorpes HiFi. We offer buy now pay later on the Chord Electronics CPA8000 Reference Pre Amplifier, If you are interested in taking advantage of our payment terms on the email shop@fanthorpes.co.uk or call us on 01482 223096 and we will email an application form to you

Chord Electronics CPA8000 Reference Pre Amplifier Specification:

  • Unbalanced Inputs: 4x RCA Phono inputs, goldplated with Teflon dielectric insulation.
  • Balanced Inputs: 3x XLR inputs.
  • Outputs: 3 x pair of 3-pin male Neutrik XLR output with 3 x pair of goldplated RCA Phono wired asymmetrically in parallel.
  • AV Bypass input: 1 x pair female 3-pin Neutrik XLR input
  • Intermodulation Distortion: -125dB all inputs
  • Signal to Noise Ratio: -125dB all inputs
  • Average Noise Floor: -135dB
  • Frequency Range: 2.5Hz – 200kHz (-3dB)
  • Nominal Gain: All inputs subject to 6 levels of switchable gain (x0.5, x1, x1.5, x2, x2.5, x3)
  • THD: 0.002% 20Hz – 20KHz
  • Channel Separation: 20 Hz 110dB, 1kHz 105dB, 10kHz 100dB, 20kHz 95dB
  • Channel Balance: 0.01dB
  • Input impedance: Unbalanced 50kOhms, Balanced 100kOhms
  • Output impedance: 100 Ohms short circuit protected
  • Output Offset: 0mVDC both channels
  • Max Input Voltage: 17Vrms balanced, 8.5V rms unbalanced
  • Max Output Voltage: 17V rms balanced, 8.5V rms unbalanced
  • Volume Performance: 0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB ( 13 secs for full travel )
  • VU Meter: Accurate to 0.5dB, 30 steps to VU Specification
  • DC Ouput triggers: 12V active high x 3
  • IR Control: 1 x IR remote control socket
  • Power Consumption: 60W
  • Operating Voltage: 85 – 270V AC (50-60Hz) auto switching
  • Dimensions: 420mm (w) x 355mm (d) x 310mm (h)
  • Weight: 30Kg
  • Five Year Warranty