Musical Fidelity M6PRE Class A Pre Amplifier
The Musical Fidelity M6PRE Class A Pre Amplifier fully balanced preamp is genuinely fully balanced; from beginning to end. Many preamps claim to be balanced but in fact are single ended preamps with balanced inputs and balanced outputs. Unlike them, the Musical Fidelity M6PRE Class A Pre Amplifier is the real deal. Its pure Class A circuitry produces very low distortion, minimal phase shift, low noise and excellent linearity. The low impedance output stages (both single ended and full balanced) will drive any power amp through any conceivable length of cable.
The Musical Fidelity M6PRE Class A Pre Amplifier fully balanced preamp has a wide range of inputs; two balanced inputs, phono MM/MC, four line inputs (one with HT bypass) and digital USB2. The Musical Fidelity M6PRE Class A Pre Amplifier fully balanced preamp is the epitome of Musical Fidelity design; superlative technical performance, great flexibility, excellent build quality, beautiful visuals and excellent value for money.
Musical Fidelity M6PRE Class A Pre Amplifier Specification:
-
Output RCA single ended, XLR balanced
-
Voltage 9.5Vrms, 19Vrms
-
26V peak to peak, 52V peak to peak
-
Output impedance 47Ω, 47Ω
-
THD+N, 20Hz to 20 kHz <0.005% <0.004%
-
Signal / noise ratio >96dB ‘A’-weighted >96dB ‘A’-weighted
-
Input sensitivity for full output 2.2V 4.4V Input impedance 75KΩ 150KΩ
-
Overload margin 12dB 12dB
-
Channel separation >96dB >96dB Frequency response +0, –1dB, 10Hz to 80 kHz
-
Input sensitivity 3.5mV (MM) 440μV (MC)
-
Signal / noise ratio 81dB ‘A’-weighted
-
Input impedance 47KΩ
-
Overload margin 29dB
-
Phono MM/MC inputs 1 pair MM/MC level RCA connectors
-
Line inputs 2 pairs line level XLR (balanced) connectors 4 pairs line level RCA connectors
-
Line outputs 1 pair line level RCA connectors, constant level TAPE outputs
-
1 pairs line level XLR (balanced) connector outputs 1 pair line level RCA connector outputs
-
USB input USB type “B” (square) socket
-
Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative)
-
Consumption 15 Watts
-
Unit only, unboxed 11.4 kg (25 lbs) In shipping carton 16 kg (35¼ lbs)
-
Wide 440mm (17⅓ ”) High, including feet 126mm (5 ”) Deep (front to back) including terminals 400mm (15¾ ”)
-
IEC type mains lead (10-Amp type) M6PRE remote control
-
Batteries, LR03 or AAA, manganese alkaline type - 2 off
|
