Pro-ject Xperience SuperPack Turntable
The new Pro-Ject Xperience SuperPack turntable takes the hugely popular Xperience acrylic turntable and pairs it with the premium Evolution tonearm. But not to rest on their laurels there, the tonearm is then pre-fitted with the immensely respected Ortofon Rondo Red moving coil cartridge. This package perfectly combines great looks with high-end sound.
Main Features of the Pro-Ject Xperience SuperPack turntable include: Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads, Conical carbon fibre armtube allows adjustment of needle azimuth despite fixed headshell, Vertical tracing angle adjustable, MDF platter with perimeter belt drive, vinyl playing surface and record clamp, Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing, Motor decoupled to reduce vibration, Sorbothane-damped aluminium cones, Electronic speed change for 33 / 45 r.p.m., Gold-plated RCA phono sockets, Dust cover and Transparent acrylic plinth.
Pro-ject Xperience SuperPack Turntable Specification:
- Turntable
- Effective tonearm length - 9.6" (230mm)
- Effective tonearm mass - 8,5g
- Overhang - 18mm
- Downforce range - 10 - 30mN
- Speed variance - ±0,5 %
- Wow and flutter - ±0,08 %
- Signal to noise - -70dB
- Platter weight/diameter - 2kg/300mm
- Dimensions (lid open) - 460 x 390 x 460mm
- Weight - 7,7kg
- Cartridge
- Output voltage at 1000 Hz, 5cm/sec. - 500 µV
- Channel balance at 1 kHz - 2 dB
- Channel separation at 1 kHz - 22 dB
- Frequency range - 20-30.000 Hz
- Tracking ability at 315Hz at recommended tracking force * - 80 µm
- Compliance, dynamic, lateral - 15 µm/mN
- Tracking force, recommended - 2.3 g (23 mN)
- Recommended load impedance - 10-200 Ohm
- Cartridge weight - 10.5 g
|
