Martin Logan ElectroMotion ESL X Speakers
The Martin Logan ElectroMotion ESL X Speakers are available for demonstration in our Hull store.
The Martin Logan ElectroMotion ESL X has a new large 102cm tall XStat™
electrostatic transducer. This is supplemented by twin 8-inch high-excursion bass drivers in a ported bass reflex cabinet. The two bass drivers are designed using custom made high
rigidity paper cones
The componentry used on the ESL X panels replicate the design and
performance of the more expensive Martin Logan models, such as
custom-wound transformers, air-core coils, large steel laminate
inductors, polyester and low DF electrolytic capacitors.
A unique XStat™ transducer was developed for the ElectroMotion Series
to reduce the gauge thickness of the electrostatic panel's steel
stators. The reduced gauge does not alter the performance
characteristics of the panel. However, as a natural byproduct of tighter
build tolerances, it does increase the visual transparency of the
panel. The EM-ESL X's XStat panel is so visually transparent it nearly
vanishes when you're sitting and listening.
Custom 5-way bi-wire binding posts allow for secure wire connections.
System Frequency Response is 41–22,000 Hz ±3db. Recommended amplifier
power is 20–400 watts per channel. Impedance is rated at 6 ohms (1.6
ohms at 20 kHz); the EM-ESL X is compatible with 4, 6, or 8 ohm rated
Part Exchange Available
As you would expect from Fanthorpes hifi, we offer a generous part exchange against the Martin Logan ElectroMotion ESL X Speakers. If you have any hifi that you wish to use as part payment against the Martin Logan ElectroMotion ESL X Speakers then either call us on 01482 223096 or email us at email@example.com and we will give you a price to change. This is a fantastic and hassle free way of making the Martin Logan ElectroMotion ESL X Speakers more affordable.
Finance Available - No Deposit Required*
Fanthorpes hifi can also offer buy now pay later on the Martin Logan ElectroMotion ESL X Speakers, allowing you to spread or defer your payments over a year. If you are interested in taking advantage of our payment terms on the Martin Logan ElectroMotion ESL X Speakers email firstname.lastname@example.org or call us on 01482 223096 and we will email an application form to you
Martin Logan ElectroMotion ESL X Speaker Specification:
Frequency Response 41–22,000 Hz ±3dB
Dispersion 30° x 40" (101.6cm) line source
Sensitivity 91 dB
Nominal Impedance 6 Ohms, 1.6 @ 20kHz
Recommended Amp Power 20-400 W
Crossover Frequency 400Hz
High Frequency Transducer XStat™ CLS™ electrostaic transducer
Panel Dimensions 1020 x 220 mm
Radiating Area 344 in2 ( cm2)
Low Frequency Driver Two 8” (20.3 cm) high excursion, high-rigidity
paper cones with extended throw driver assembly, non-resonance
asymmetrical chamber format, bass reflex
HxWxD:1503 x 238 x 526 mm
* No deposit required on in store purchases only. Minimum 10% deposit required for online applications on the Martin Logan ElectroMotion ESL X Speakers