Spendor A6R Speakers

Save £900.00
Ex-Demo
Spendor A6R Speakers

Spendor A6R Speakers

£1,895.00

IN STOCK

Spendor A6R Speakers

We are moving on our demonstration Spendor A6R Speakers in Cherry for £1895, saving you £900 over the original retail price of £2795. For more infotmation about the Spendor A6R call us on 01482 223096 or email shop@fanthorpes.co.uk.

The Spendor A6R speakers are a refinement from the previous spendor A6. The two main diffrenecs between the models are the introduction of a new bass/mid driver and a re-engineered crossover. These improvements allow the A6R to deliver a very dynamic extended bass response coupled with a highly detailed midband. This combined with the sweet nature of the Spendor's high frequency delivery gives an incredibly well balance preformace.

The Spendor A6R speakers use a letterbox port design, Spendor call this a linear flow reflex design, and claim it is inspired by the spoilers on F1 cars. The air is distributed more effectively then from a standard rear port, meaning the Spendor A6R Speakers are easier then most to position

Part Exchange Available

As you would expect from Fanthorpes hifi, we offer a generous part exchange against the Spendor A6R Speakers. If you have any hifi that you wish to use as part payment against the Spendor A6R Speakers then either call us on 01482 223096 or email us at shop@fanthorpes.co.uk and we will give you a price to change. This is a fantastic and hassle free way of making the Spendor A6R Speakers more affordable.


Finance Available - No Deposit Required*

Fanthorpes hifi can also offer buy now pay later on the Spendor A6R Speakers, allowing you to spread or defer your payments over a year. If you are interested in taking advantage of our payment terms on the Spendor A6R Speakers email shop@fanthorpes.co.uk or call us on 01482 223096 and we will email an application form to you

Spendor A6R Speakers Specification:

  • Description - 2-way floor standing loudspeaker
  • Enclosure type - Spendor linear flow reflex
  • HF drive unit - 29mm wide-surround dome with fluid cooling
  • MF / LF drive unit - Spendor 180mm ep77 cone
  • Sensitivity - 88dB for 1 watt at 1 metre
  • Crossover point - 3.3 kHz
  • Typical in-room response - 32 Hz - 25kHz
  • Impedance - 8 ohms nominal
  • Impedance minimum - 6.0 ohms
  • Power handling - 200 watts unclipped programme
  • Terminals - WBT 4 way binding posts single-wired
  • Cabinet (HxWxD) - 875 x 192 x 280mm
  • Finish - black ash, cherry, light oak, dark walnut
  • Weight - 18 kg each

* No deposit required on in store purchases only. Minimum 10% deposit required for online applications for the Spendor A6R Speakers.

WHY SHOP AT FANTHORPES

TRADE IN

SAVE MONEY BY TRADING IN YOUR OLD EQUIPMENT FOR BRAND SPANKING NEW

LEARN MORE

UK DELIVERY

We offer a UK wide personal delivery and install service, enquire today

MORE INFO

FINANCE AVAILABLE

PARTNERING UP WITH HITACHI FINANCE, WE CAN OFFER YOU FINANCE ON A RANGE OF PRODUCTS

FINANCE INFORMATION

ALSO AT FANTHORPES

Spendor Speakers At Fanthorpes

Spendor speakers are designed and hand built at the Spendor factory in Hailsham, Sussex in the UK. Traditional craftmanship, skilled design capability and modern engineering materials all combine to produce superbly built loudspeakers with models to suit any taste or application.

Spendors unique bass and mid drive units are also designed and built in Hailsham. Many other manufacturers are content to buy in standard, or slightly modified versions of drive units easily obtainable from component suppliers, whilst claiming the drive units as their own. Not so with Spendor Audio. The main drivers are the heart of the loudspeaker, and should be designed and built with care, and without compromise.