Spendor A7 Speakers

Spendor A7 Speakers

Spendor A7 Speakers

£2,995.00

IN STOCK

Spendor A7 Speakers

The Spendor A7 Speakers are available for demonstration in our Hull store by request.

The Spendor A7 is a major revision of the highly acclaimed award winning Spendor A6R floor standing loudspeaker. The result is a dramatic up-lift in dynamics, resolution and low frequency extension. The new Spendor A7 delivers class leading performance and value.

At the heart of the A7 Speakers is a Spendor 18cm bass-mid drive unit which incorporates key materials developed for the Spendor D7 loudspeaker. It features an EP77 polymer cone and new surround and suspension materials with outstanding thermal and mechanical stability. The Spendor A7 has exceptional dynamic ability with extremely good low-level linearity.

The Spednor A7 Speakers use a completely re-engineered crossover brings significantly improved driver integration and a vivid, dynamic, but always natural, sound. The crossover network has precision wound high-linearity tapped inductors which avoid distortion, and which allow the very fine tuning of frequency and phase response, which is essential to achieve a coherent balanced sound.

The new Spednor A7 retains the well-proven 4th generation Spendor linear-flow port, which gives the A7 Speakers an unrivalled ability to deliver deep articulate bass in almost any listening room. It allows great flexibility when positioning the loudspeakers close to walls, furniture or in smaller rooms.

A 22mm wide-surround tweeter combines the extended frequency response of a small diaphragm with the low frequency characteristics of a larger diaphragm to give stable low distortion response over a very wide frequency range. The unique diaphragm profile delivers a smooth extended high frequency response over a wide listening area.

Timing is fundamental to the musical experience. In conventional loudspeakers rigid high density cabinet panels are mass-damped to reduce cabinet-talk. Spurious energy is stored and released slowly. This creates unacceptable blurring and slowing of the sound. Spendor’s solution is Dynamic Damping. Small low mass constrained polymer dampers at key energy interface points instantly convert any spurious energy in the cabinet into inaudible heat. The result is a naturally fast engaging and open sound.

Internal cables are high-grade silver plated pure copper with halogen free dielectric. High linearity audio grade capacitors and an easy to drive 8ohm load ensure uncompromised performance and complete compatibility with all good amplifiers and cables.

The base of each Spendor A7 cabinet has four machined steel stabiliser inserts. These contribute to the neat appearance and good stability of the slim cabinets. The stabilisers are secured directly into the main structure of the cabinet so that micro-movement or flexing of the plinth and feet (which blur fine detail and destroy ambience) is eliminated.

The Spendor A7 style is on-trend with its linear form cabinet and modern finishes. Available finishes are natural oak, dark walnut, black ash veneer and satin white lacquer. The plinth has a contrasting black finish and an optional grille is available.

Part Exchange Available

As you would expect from Fanthorpes hifi, we offer a generous part exchange against the Spendor A7 Speakers. If you have any hifi that you wish to use as part payment against the Spendor A7 Speakers then either call us on 01482 223096 or email us at shop@fanthorpes.co.uk and we will give you a price to change. This is a fantastic and hassle free way of making the Spendor A7 Speakers more affordable.

Finance Available - No Deposit Required*

Fanthorpes hifi can also offer buy now pay later on the Spendor A7 Speakers, allowing you to spread or defer your payments over a year. If you are interested in taking advantage of our payment terms on the Spendor A7 Speakers email shop@fanthorpes.co.uk or call us on 01482 223096 and we will email an application form to you

Spendor A7 Speakers Specification:

  • Description: 2-way floor standing loudspeaker
  • Enclosure type: Rigid, asymmetric braced cabinet with dynamic damping
  • Vent type: Spendor 4G linear flow reflex
  • Input connection: Single pair precision binding posts
  • Typical in-room response: 32Hz - 25kHz
  • Power handling: 25- 200 watts
  • Sensitivity: 88dB
  • Nominal impedance: 8 ohms
  • HF driver: 22mm polyamide dome
  • Bass/mid driver: Spendor 18cm EP77 polymer cone
  • Crossover frequency: 3.7kHz
  • Net Weight: 18kg
  • Height: 934mm
  • Width: 180mm
  • Depth: 305mm
  • Finishes: Black ash, dark walnut, natural oak (standard), Satin white (optional at extra cost)
  • Accessories: Height adjustable spike feet
  • Options: Grilles

* No deposit required on in store purchases only. Minimum 10% deposit required for online applications on the Spendor A7 Speakers.

WHY SHOP AT FANTHORPES

trade in

TRADE IN

SAVE MONEY BY TRADING IN YOUR OLD EQUIPMENT FOR BRAND SPANKING NEW

LEARN MORE
uk delivery

UK DELIVERY

We offer a UK wide personal delivery and install service, enquire today

MORE INFO
finance

FINANCE AVAILABLE

PARTNERING UP WITH HITACHI FINANCE, WE CAN OFFER YOU FINANCE ON A RANGE OF PRODUCTS

FINANCE INFORMATION

ALSO AT FANTHORPES

Spendor Speakers At Fanthorpes

Spendor speakers are designed and hand built at the Spendor factory in Hailsham, Sussex in the UK. Traditional craftmanship, skilled design capability and modern engineering materials all combine to produce superbly built loudspeakers with models to suit any taste or application.

Spendors unique bass and mid drive units are also designed and built in Hailsham. Many other manufacturers are content to buy in standard, or slightly modified versions of drive units easily obtainable from component suppliers, whilst claiming the drive units as their own. Not so with Spendor Audio. The main drivers are the heart of the loudspeaker, and should be designed and built with care, and without compromise.