Exposure XM HP Headphone Amplifier

Exposure XM HP Headphone Amplifier

The Exposure XM HP Headphone Amplifier is available for demonstration in our Hull store by request.

British manufacturer Exposure have released a very high specification headphone amplifier with the launch of the Exposure XM HP small footprint amplifier. Highlights include 3 analogue inputs, one of which is a moving magnet phono stage meaning you can plug your turntable directly into the XM HP. Fans of digitial will not find the Exposure lacking either with the inclusion of five digital inputs, There is a USB B input to directly connect a streamer. There are 2 BNC specified digital coaxial inputs, and two optical inputs as well.

In terms of outputs, the Exposure XM HP has a pre out meaning that you can if required connect a power amplifier to drive a loudspeaker set up. For headphone connectivity there are a pair of 6.35mm jacks and a pairs of XLR sockets allowing 2 pairs of headphones to be used at one time. The discrete outputstage of the XM HP mean that the amplifier will drive even low impedance headphones. To cap it all the Exposure headphone amplifier is also remote control

Part Exchange Available

As you would expect from Fanthorpes hifi, we offer a generous part exchange against the Exposure XM HP Headphone Amplifier. If you have any hifi that you wish to use as part payment then either call us on 01482 223096 or email us at shop@fanthorpes.co.uk and we will give you a price to change. This is a fantastic and hassle-free way of making the Exposure XM HP more affordable.

Finance Available

Fanthorpes hifi can also offer buy now pay later on the Exposure XM HP Headphone Amplifier, allowing you to spread or defer your payments over a year. If you are interested in taking advantage of our payment terms, email shop@fanthorpes.co.uk or call us on 01482 223096 and we will email an application form to you.

Exposure XM HP Headphone Amplifier Specification:

• AUX/PH input MM 2.5mV @ 1KHz, 47K ohms S/N > 73dB
• AUX 2 & AUX 3 input line 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB
• SPDIF inputs BNC Coax & Optical 32 - 192KHz @ 16-24 bits
• Total Harmonic Distortion <0.005% at 1KHz @ 1.3V RMS output
• Signal to Noise Ratio ref 1.3V RMS Output 1KHz : >98dB
• USB input Linear PCM 44K1 - 192KHz @ 16-24 bits
• Output Impedance < 5 ohms
• Maximum Level into 33 ohms load @ 1KHz & 0.01% THD : 7V RMS (1.5W)
• Total Harmonic Distortion @ 2V output, 1KHz : <0.003% (120mW)
• Maximum Level into 330 ohms @ 1KHz & 0.01% THD : 7.5V RMS (170mW)
• Total Harmonic Distortion @ 2V output, 1KHz : <0.003% (12mW)
• Load Impedance total all outputs 16 ohms minimum
• Dimensions WxHxD 218 x 89 x 363 mm inc knob