follow us

Spendor Classic 100 Standmount Speakers

From £10,250

  • 5 Years warranty

Spendor Classic 100 Standmount Speakers

The Spendor Classic 100 is the largest stand-mount in the Classic Series and a direct descendant of Spendor's original BC3 monitor. A 31cm bass driver, 18cm midrange and 22mm tweeter give it genuine full-range performance — bass down to 25Hz — from a cabinet that still sits on a stand.

Like every Spendor speaker, the Classic 100 is designed, engineered and hand-built at the company's own facility in Sheffield. Its bass driver uses a Kevlar composite cone in a rigid die-cast chassis, and the cabinet follows the BBC-derived, carefully damped construction that defines the Classic sound.

It's built for larger rooms and listeners who want big-speaker scale and authority, with the natural, unforced presentation the Classic range is known for.

 

Key Features

  • Flagship Classic stand-mount — descended from the original Spendor BC3
  • 31cm Kevlar composite bass driver — in a die-cast chassis, for deep, authoritative bass down to 25Hz
  • Three-way design — dedicated 18cm midrange driver for an open, detailed midband
  • BBC-derived thin-walled cabinet — controlled-resonance construction for a natural, non-fatiguing sound
  • Wide amplifier compatibility — 8 ohm nominal impedance, 25W to 250W
  • Real wood veneer cabinet — hand-finished in Cherry or Walnut

 

Full Specification

Spec Detail
Type 3-way reflex stand-mount
Drive Units 310mm bass, 180mm midrange, 22mm tweeter
Typical In-Room Response 25Hz–25kHz
Sensitivity 87dB / 1W / 1m
Nominal Impedance 8 ohms (minimum 4.7 ohms)
Recommended Amplifier 25–250W
Crossover 490Hz, 3.6kHz
Dimensions (H x W x D) 700 x 370 x 433mm
Weight approx. 36kg each
Finishes Cherry, Walnut
Price (UK, per pair) £10,250

 

Why Buy Your Spendor Classic 100 from Fanthorpes

Every Spendor speaker we sell can be part-exchanged against your existing equipment, helping bring down the cost of your upgrade — and if you'd rather spread the cost, finance is available on any order over £400. The Classic 100 is available to demo on request — call our team on 01482 223096 to arrange a listen, or for advice on stands and system matching.

 

Frequently Asked Questions

Does the Spendor Classic 100 need stands?

Yes — it’s a large stand-mount. The dedicated Spendor Classic 100 Stand, sold separately, is built to support its weight and set it at the right height.

What amplifier suits the Spendor Classic 100?

It’s rated for 25W to 250W. With impedance dipping to around 4.7 ohms, a capable amplifier with good current delivery will bring out its full scale.

What’s the difference between the Classic 100 and Classic 100Ti?

They share the same drive units, cabinet and performance. The 100Ti adds a multilayer titanium front baffle for a more contemporary look.