follow us

Spendor Classic 100Ti Standmount Speakers

From £12,250

  • 5 Years warranty

Spendor Classic 100Ti Standmount Speakers

The Spendor Classic 100Ti is the Classic 100 with a contemporary twist: a multilayer titanium front baffle set into a Walnut cabinet. Underneath, it's the same flagship Classic stand-mount — a 31cm bass driver, 18cm midrange and 22mm tweeter delivering genuine full-range performance down to 25Hz.

Like every Spendor speaker, the Classic 100Ti is designed, engineered and hand-built at the company's own facility in Sheffield. Its heritage goes back to Spendor's original BC3 monitor, and its cabinet follows the BBC-derived, carefully damped construction that defines the Classic sound.

It's for listeners who want the scale and natural presentation of the Classic 100 with a bolder, more modern look in the room.

 

Key Features

  • Multilayer titanium front baffle — a striking, contemporary finish over a Walnut cabinet
  • 31cm Kevlar composite bass driver — in a die-cast chassis, for deep, authoritative bass down to 25Hz
  • Three-way design — dedicated 18cm midrange driver for an open, detailed midband
  • BBC-derived thin-walled cabinet — controlled-resonance construction for a natural, non-fatiguing sound
  • Wide amplifier compatibility — 8 ohm nominal impedance, 25W to 250W

 

Full Specification

Spec Detail
Type 3-way reflex stand-mount
Drive Units 310mm bass, 180mm midrange, 22mm tweeter
Typical In-Room Response 25Hz–25kHz
Sensitivity 87dB / 1W / 1m
Nominal Impedance 8 ohms (minimum 4.7 ohms)
Recommended Amplifier 25–250W
Crossover 490Hz, 3.6kHz
Dimensions (H x W x D) 700 x 370 x 433mm
Weight approx. 36kg each
Finish Walnut with titanium front baffle
Price (UK, per pair) £12,250

 

Why Buy Your Spendor Classic 100Ti from Fanthorpes

Every Spendor speaker we sell can be part-exchanged against your existing equipment, helping bring down the cost of your upgrade — and if you'd rather spread the cost, finance is available on any order over £400. The Classic 100Ti is available to demo on request — call our team on 01482 223096 to arrange a listen, or for advice on stands and system matching.

 

Frequently Asked Questions

Does the Spendor Classic 100Ti need stands?

Yes — it’s a large stand-mount. The dedicated Spendor Classic 100 Stand, sold separately, is built to support its weight and set it at the right height.

Does the 100Ti sound different from the Classic 100?

No — the drive units, cabinet and specification are the same. The titanium front baffle is a styling choice.

What amplifier suits the Spendor Classic 100Ti?

It’s rated for 25W to 250W. With impedance dipping to around 4.7 ohms, a capable amplifier with good current delivery will bring out its full scale.