The Spendor Classic 200Ti takes the flagship Classic 200 and adds a multilayer titanium front baffle to its Walnut cabinet, for a bold, contemporary look. The performance is pure Classic 200: twin 31cm bass drivers, an 18cm midrange and a 22mm tweeter, with bass down to 20Hz.
Like every Spendor speaker, the Classic 200Ti is designed, engineered and hand-built at the company's own facility in Sheffield. Its midrange-matched tonal balance keeps voices and instruments natural and unforced, and its sealed cabinet follows the BBC-derived, carefully damped construction behind the whole Classic range.
It's the ultimate Classic Series all-rounder for large rooms — effortlessly powerful at any listening level, with real presence in the room.
| Spec | Detail |
|---|---|
| Type | 3-way sealed floorstander |
| Drive Units | 2 x 310mm bass, 180mm midrange, 22mm tweeter |
| Typical In-Room Response | 20Hz–25kHz |
| Sensitivity | 89dB / 1W / 1m |
| Nominal Impedance | 8 ohms (minimum 6.0 ohms) |
| Recommended Amplifier | 25–300W |
| Crossover | 550Hz, 3.8kHz |
| Dimensions (H x W x D) | 1117 x 368 x 513mm |
| Weight | approx. 55kg each |
| Finish | Walnut with titanium front baffle |
| Price (UK, per pair) | £23,500 |
Every Spendor speaker we sell can be part-exchanged against your existing equipment, helping bring down the cost of your upgrade — and if you'd rather spread the cost, finance is available on any order over £400. The Classic 200Ti is available to demo on request — call our team on 01482 223096 to arrange a listen, or for advice on stands and system matching.
No — the drive units, cabinet and specification are the same. The titanium front baffle is a styling choice.
It’s a large floorstander with bass down to 20Hz, so it’s best in medium to large rooms with some space around the cabinets.
It’s rated for 25W to 300W. With 89dB sensitivity and a minimum impedance of 6 ohms, it’s easier to drive than its size suggests.