follow us

Spendor Classic 2/3 Standmount Speakers

From £4,350

  • 5 Years warranty

Spendor Classic 2/3 Standmount Speakers

The Spendor Classic 2/3 is the larger of the two two-way stand-mounts in the Classic Series. It's built around a 22cm bass/mid driver in a wider, deeper cabinet than the Classic 3/1, giving it more scale, more punch and a fuller low end — while keeping the open, natural midrange the Classic range is known for.

Like every Spendor speaker, the Classic 2/3 is designed, engineered and hand-built at the company's own facility in Sheffield. It follows the BBC-derived thin-walled cabinet approach used across the Classic Series: the enclosure is carefully damped so it works with the drive units rather than against them, which is a big part of the relaxed, unforced Classic sound.

It suits medium-sized rooms and listeners who want the Classic character with more weight and dynamics than the 3/1, without stepping up to a three-way design.

 

Key Features

  • Larger two-way Classic stand-mount — 22cm bass/mid driver for extra scale and punch
  • BBC-derived thin-walled cabinet — controlled-resonance construction for a natural, non-fatiguing sound
  • Bass down to 35Hz — real weight and extension from a stand-mount cabinet
  • 22mm polyamide dome tweeter — shared across the Classic Series for a consistent, smooth top end
  • Easy to drive — 88dB sensitivity and an 8 ohm nominal load, compatible with amplifiers from 25W to 200W
  • Real wood veneer cabinet — hand-finished in Cherry or Walnut

 

Full Specification

Spec Detail
Type 2-way reflex stand-mount
Drive Units 220mm bass/mid, 22mm tweeter
Typical In-Room Response 35Hz–25kHz
Sensitivity 88dB / 1W / 1m
Nominal Impedance 8 ohms (minimum 6.8 ohms)
Recommended Amplifier 25–200W
Crossover 3.6kHz
Dimensions (H x W x D) 543 x 273 x 338mm
Weight approx. 14.5kg each
Finishes Cherry, Walnut
Price (UK, per pair) £4,350

 

Why Buy Your Spendor Classic 2/3 from Fanthorpes

Every Spendor speaker we sell can be part-exchanged against your existing equipment, helping bring down the cost of your upgrade — and if you'd rather spread the cost, finance is available on any order over £400. The Classic 2/3 is available to demo on request — call our team on 01482 223096 to arrange a listen, or for advice on stands and system matching.

 

Frequently Asked Questions

Does the Spendor Classic 2/3 need stands?

Yes — it’s a stand-mount design. The dedicated Spendor Classic 2/3 Stand, sold separately, sets it at the correct height for a seated listener.

What amplifier suits the Spendor Classic 2/3?

It’s rated for amplifiers between 25W and 200W. With 88dB sensitivity and an easy 8 ohm load, it works well with a wide range of amplifiers.

How does the Classic 2/3 compare to the Classic 3/1?

The 2/3 has a larger 22cm bass/mid driver (vs 18cm) and a bigger cabinet, with bass extending to 35Hz rather than 40Hz. The 3/1 is the better fit for smaller rooms and positions close to a wall.