Graham Slee Reflex C Phono Stage

Graham Slee Reflex C MC Phono Stage

Graham Slee’s flagship phono stage for low-output moving coil cartridges, hand-built in Britain and supplied with the PSU1 linear power supply. It gives a stable, three-dimensional stereo image – height and depth as well as left to right. Demonstrations may be possible by arrangement with Graham Slee – just ask.

Built for Moving Coil

A dedicated MC stage doesn’t have to compromise for moving magnet. The Reflex C is optimised for 0.2–1.0mV cartridges, with 62dB of gain and a 100 ohm input (1k ohm to order).

Good to Know

• For low-output moving coil cartridges only
• PSU1 power supply included; PSU1 Enigma upgrade available to order – ask us
• Using a moving magnet or high-output cartridge? Choose the Reflex M
• Want EQ for older records too? See the Revelation

Specification

• Connectors: RCA/phono sockets, hard gold plated
• Input sensitivity range: 0.2mV to 1.0mV (recommended)
• Output range (for above inputs): 252mV to 1,260mV
• Maximum input: 3.9mV rms
• Maximum output: 4.914V rms
• Gain: 62dB (1,260) at 1kHz
• Input impedance: 100 Ohms (1k Ohm to order)
• Output impedance: 1k Ohm (will drive 10k Ohms and above)
• Noise at output: -62dB CCIR Quasi-peak 20Hz to 20kHz
• Distortion: typically 0.02%
• RIAA accuracy: < 0.5dB
• Frequency response: 20Hz - 100kHz ("flat", corrected to RIAA)
• Channel balance: 0.2dB
• Channel separation: 60dB
• Power supply: PSU1 linear power supply (included)
• Size (approx.): W107 x H50 x D180 mm inc. jacks